Assembly 2

Step 6: Connect top Cross Bar, Right Side, and Left Side pieces.

Connect pieces to look like this:

Step 7: To finish the Top, add Front Brace and Back Brace to pieces from Step 6.
Goes
to:

Step 8: Make one Floor Leg. Use pieces E and 1.
Connect pieces to look like this:

Step 9: Repeat Step 8 to make the second Floor Leg.


Step 10: Make one Table Leg. Use pieces E and 2.
Connect pieces to look like this:

Step 11: Repeat Step 10 three more times to make a total of four Table Legs.